6x12 inch Fine Pole Magnetic Chuck Machining Workhold Permanent Tool Metalwork

Description

If you need other model, please search 6x6  or 6x12  or 6x18 or 8x16 or 10x20 or 12x12 magnetic chuck in our ebay store.
This brand new
6"X12"
Magnetic Chuck
is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
This magnetic lifter is made with neodymium magnets which are used for lifting steel sheets, blocks, rods, cylinders and other magnetic materials. The handle on the magnet features a lock-on/lock-off mechanism that requires the operator to manually switch between the two states. It requires no electricity. We used advanced N45 Magnet Material
with safety factor of 3.5
to provide superstrong magnetism for you, and its max pulling power equals to 450kg/ 992lbs, while most of our competitors use N40/N42 magnet material whose safety factor is between 2 to 2.5. Our N45 Magnet is stronger, lasts longer and can attach rough  surface. Each item must be tested qualified before they are sent out of the factory. We guarantee you a safer and more efficient working environment.
Application
The magnetic chuckcan be used for processing various magnetic conduction work pieces.
For surface grinder, tool grinder, EDM and other applications.
Thin & light weight work piece are ideally suitable because of fine-pitched magnetic poles.
Note
Please clean the surface of the steel sheet before using it.
Prohibit standing under the steel sheet when the steel sheet is lifted.
Please do not control the handle when there is no any steel sheet under the magnetic lifter.
There are more magnets in our magnetic lifter, so the magnetism is stronger.
Specification:
Operating Temperature : ≤80℃
Magnetic Force : ≥100N/CM²
Item Dimensions : 300*150*45mm/11.8*6*1.8 in
Safety Factor : 3.5
Pole Pitch : 1.5+0.5mm（copper bar）
Package content:
1 × 6"X12" Magnetic Chuck
1 × Handle
Set of Screws