FLUX CORE MIG WIRE 10# SPOOL .035 E71tgs GASLESS WELDING WIRE

Description

This is for one (1) 10lbs spool of flux cored wire NO gas needed. Wire size is .035 . These products that we have proven & tested to be good quality products to sell to you our customers.
Description
Gasless Wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Sizes and Packaging
.035”  10 lb. (4.5 kg) spools
Applications
Gasless Wire E71T-GS is most popular for the home workshop welder because it works so well on 110 volt machines and can be used on such thin gauge steel. Gasless Wire E71T-GS is used quite extensively in automobile bodyshops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.
NOTE: As with all self-shielded wires, Washington Alloy Gasless Wire E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.
Features
No Shielding Gas Needed
Single Pass Welding of Thin Gauge Galvanized Steel
Excellent for Outdoor Use
Smooth Arc – Minimal Spatter
DC- Straight Polarity
Works Well In Wind
Welding Positions
All Positions (H, F, VU, OH)
DC- Straight Polarity (electrode negative
Free shipping to all 50 Unites States
*** items subject to sales tax ***
*** Don't forget to check out our Ebay store for all your MIG welding Accessories such as Anti-Spatter products, Contact Tips, Diffusers & Nozzles. Combine orders for maximum shipping discounts ***