-40%

Logging Personal Noise Dose Meter SL-1256DOS Sound Level Tester

$ 210.67

Availability: 100 in stock
  • Item must be returned within: 60 Days
  • Condition: New
  • All returns accepted: Returns Accepted
  • Model: SL-1256DOS
  • Brand: Graigar
  • Return shipping will be paid by: Buyer
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: Does Not Apply
  • Custom Bundle: No

    Description

    Logging Personal Noise Dose Meter SL-1256DOS Sound Level Tester
    DOSE is a parameter used to quantify noise exposure measured in a period, during turns of % noise exposure relative to 90dBA for 8 hours.
    i.e. 100% DOSE = 90dBA for 8 hours
    This is known as the Criterion. Other criterion are available such as 100% DOSE = 85dBA for 8 hours to meet legislation in different countries.
    If the person stayed in this environment for 4 hours, he would receive 50%DOSE.
    Also if the noise level was say 93dBA, 3dB higher, a 100% DOSE would be accumulated in only 4 hours, The above example is for a dose meter with 3dB Exchange Rate, where a 3dB increase in sound level corresponds to a doubling energy. A dose meter with 5dB Exchange Rate is also, available where the sound must increase by 5dB to double the dose as required to meet noise legislation in some countries.
    Specifications:
    Standard Applied
    IEC61252, ANSI S1.25 – 1992 for dose meter and sound exposure meters. IEC 61672-1-2013 Class 2
    Microphone
    1/2-inch electret condenser microphone with 31-inch integral cable
    Display
    Liquid Crystal Display
    Measurement Ranges (Linearity and Indicator ranges at 4KHz)
    60 – 130 : 60 – 130dB (A and C)
    70 – 140 : 70 – 140dB (A and C)
    Peak  Ranges  (C–weighted  or  Linear  Peak  over the  top  40dB  of  each  measurement  range)
    60 – 130 : 93 – 133dB Peak
    70 – 140 : 103 – 143dB Peak
    Frequency Weightings
    RMS Detector: A or C
    Peak Detector: C or Z (Linear)
    Time Weightings
    Fast and Slow (RMS detector)
    Exchange Rate
    3, 4, 5 or 6dB
    Stabilization Time
    10 seconds from power on
    Threshold and Criterion Levels (From the setup, predefined in the built – in setup according to applicable standards)
    User–defined setups in the following ranges :
    Threshold Level : 70 – 90dB in 1dB steps
    Criterion Level : 80, 84, 85 or 90dB
    Criterion Level : 80, 84, 85 or 90dB
    At 0.1dB above the top of the selected measurement range
    At 0.1dB above the top of the selected measurement range
    Under–Range Indications
    High Level Detector
    115dB
    Keypad Lock
    Lock and unlock by pressing key combinations: Up and right arrows to lock; left and down arrows to unlock
    Clock
    Real–time clock with calendar
    Memory
    Results from 50 measurements can be stored for later viewing and download
    Measurement Control
    Measurement Duration : May be set to 5, 10, 15, or 30 minutes or 1, 2, 4, 8, 10, 12, or 24 hours
    Timers
    Up to 16 timers(automatic start and stop)can be set(maximum up to one month ahead of measurement time)
    Timer Controlled Started / Stop
    Set up from the PC software or meter keypad
    Logging
    All measurement parameters values can be logged
    Logging Period (LP)
    1s, 2s, 5s, 10s, 15s, 20s, 30s, 1min, 2min, 5min, 10min, 15min, 20min, 30min or 60min
    Logging Capacity
    120000 values can be stored at any one time
    Setup
    Eight built–in (predefined) default setups are included. Nine additional user–defined setups can be stored
    Output
    USB interface
    Power Supply
    4x1.5V AAA Size (UM-4)Battery
    Battery Indicator
    Symbol indication battery voltage level in 4 steps. Indicator flashes when voltage is insufficient for operation
    Operating Temperature & Humidity
    0 – 50ºC (32 to 122ºF) ,10 – 90%RH
    Storage Temperature & Humidity
    -10 – 60ºC(14 to 140ºF) ,10 – 75%RH
    Size
    140x72x34mm
    Weight
    Approx. 350g (including batteries)
    Standard Accessories
    Main Unit
    External Probe
    Screwdriver
    Carrying Case (B04)
    Software
    PAYMENT INFORMATION:
    1.We can accept Credit Cards,Paypal,T/T,Escrow and so on.
    2.The buyer is responsible for any tax and/or duty charged by their country.
    INTERNATIONAL SHIPPING:
    The package will be shipped by DHL, FEDEX or EMS. After we shipped the parcel,we'll fill in the tracking number and inform you by e-mail.Please write the correct address and telephone number when you make orders,so the courier can contact you when they deliver the parcel to you. thanks
    WARRANTY INFORMATION:
    1.All the products have been checked and packed in good condition before dispatch.
    2.All the products with one year warranty.
    3.If you find any quality problems,please send it back within 3 days,and we'll send you a new one or refund you the payment after we get the returned one.
    4.Buyers have to pay for the return cost and we will pay the cost for resend
    5.All products returned should be in new conditions.
    CONTACT US:
    Office Tel: 008675527541660
    Cellphone: 008615967476818
    1.A good feedback is very important for our store,if you feel satisfied with our products,please give us  positive feedbacks.
    2.Please contact us before leaving any negative or neutral feedback,We will work with you to solve any problems.