TUNGALOY A16-ACLNR4-D20 Indexable Boring Bar 1-1/4" Min Bore Dia 1"

Description

Open Box - Distributor Stock.  Never used in Production.
Double-clamp boring bar, for negative 80deg rhombic insert
(See image for dimensions)
HAND: R
material: S
DMIN: 1.25
DCONMS: 1
WF: 0.64
LF: 12
LH: 1.75
H: 0.906
f2: 0.172
GAMP: -6
GAMF: -13
RE: 0.031
CSP: With coolant hole
Torque: 2.21
Related Inserts:
2QP-CNGM-HF: Negative relief ang., G class, 80deg rhombic CBN insert, with chipbreaker for finishing
2QP-CNGM-HM: Negative relief ang., G class, 80deg rhombic CBN insert, with chipbreaker for medium cutting to roughing
2QP-CNGM-HP: Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker for finishing of hardened steel
2QP-CNM/GA: Negative relief ang., M/G class, 80deg rhombic CBN insert
2QP-GNGA: Negative relief ang., G class, 80deg rhombic CBN insert with corner angle 70 deg
2QP-GNGG-HP: Negative relief ang., G class, 80deg rhombic CBN insert with corner angle 70 deg and chipbreaker for finishing
4QP-CNGG-HF: Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker for finishing
4QP-CNGG-HM: Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker for medium cutting to roughing
4QP-CNM/GA: Negative relief ang., M/G class, 80deg rhombic CBN insert
4QS-CNGA: Negative relief ang., G class, 80deg rhombic CBN insert
4QS-CNGG-HM: Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker
CNGA-DIA: Negative relief ang., G class, 80deg rhombic PCD insert
CNGA-QBN: Negative relief ang., G class, 80deg rhombic CBN insert
CNGG-01: Negative relief ang., G class, 80deg rhombic insert, for precision finishing
CNGGR/L-C: Negative relief ang., G class, 80deg rhombic insert, for precision finishing
CNGGR/L-P: Negative relief ang., G class, 80deg rhombic insert, for medium cutting
CNM/GA: Negative relief ang., M/G class, 80deg rhombic insert, without chipbreaker for finishing to medium cutting
CNMA-W: Negative relief ang., M class, 80deg rhombic insert with wiper
CNMG: Negative relief ang., M class, 80deg rhombic insert, all-round chipbreaker for medium cutting
CNMG/CNGP-28: Negative relief ang., M class, 80deg rhombic insert, for Medium Finishing
CNMG-11: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMG-17: Negative relief ang., M class, 80deg rhombic insert, for finishing of mild steel
CNMG-27: Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting
CNMG-33: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-37: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-38: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-AFW: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMG-AM: Negative relief ang., M class, 80deg rhombic insert, for high-feed machining in medium of steel
CNMG-AS: Negative relief ang., M class, 80deg rhombic insert, for high feed and small depth of cut
CNMG-ASW: Negative relief ang., M class, 80deg rhombic insert, for high feed and small depth of cut
CNMG-CF: Negative relief ang., M class, 80deg rhombic insert, for finishing of grey and ductile cast Iron
CNMG-CH: Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting of grey and ductile cast iron
CNMG-CM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting of grey and ductile cast iron
CNMG-DM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-FW: Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing.
CNMG-HMM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting of super alloy
CNMG-HRF: Negative relief ang., M class, 80deg rhombic insert, for finishing of super alloy
CNMG-HRM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting to finishing of super alloy
CNMG-NM: Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting
CNMG-NS: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMGR/L-S: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-SA: Negative relief ang., M class, 80deg rhombic insert, for medium cutting of stainless steel etc.
CNMG-SF: Negative relief ang., M class, 80deg rhombic insert, for finishing of stainless steel
CNMG-SH: Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting of stainless steel
CNMG-SM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting of stainless steel
CNMG-SS: Negative relief ang., M class, 80deg rhombic insert, for finishing of stainless steel etc.
CNMG-SW: Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing to medium cutting
CNMG-TA: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-TF: Negative relief ang., M class, 80deg rhombic insert, for precision finishing
CNMG-TH: Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting
CNMG-THS: Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting
CNMG-TM: Negative relief ang., M class, 80deg rhombic insert, for medium cutting
CNMG-TQ: Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting
CNMG-TS: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMG-TSF: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMG-ZF: Negative relief ang., M class, 80deg rhombic insert, for finishing
CNMG-ZM: Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting
CNMM-DIA: Negative relief ang., M class, 80deg rhombic PCD insert