-40%
Weldcote 33lb Spool E71T-1 Flux-Cored Carbon Steel Welding Wire .045
Weldcote 33lb Spool E71T-1 Flux-Cored Carbon Steel Welding Wire .045

Weldcote 33lb Spool E71T-1 Flux-Cored Carbon Steel Welding Wire .045"

$ 40.39

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Diameter: 0.045 in
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals including glass wool fibers (inhalable and biopersistent), crystalline silica (airborne particles of respirable size), and formaldehyde, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
  • Refund will be given as: Money Back
  • Roll Weight: 33 lb
  • Item must be returned within: 30 Days
  • Condition: New
  • MPN: E71T1045X33SP
  • Brand: Weldcote
  • Welding Wire Material: Flux-Cored Carbon Steel

    Description

    Weldcote 33lb Spool E71T-1 Flux-Cored Carbon Steel Welding Wire .045"
    Description/Application: Weldcote Metals E71T-1, features lower spatter and fume emissions than conventional products in this class. This electrode is intended for single and multiple pass welding of carbon and certain low alloy steels in all positions, particularly in the overhead and vertical up positions. Weldcote Metals E71T-1 is used where a minimum tensile strength of 70,000 psi is required in the deposited weld metal. Weldcote Metals E71T-1 electrodes are classified with CO2 shielding gas by this specification. However, gas mixtures of argon-CO2 are also used to improve usability, especially for out of position applications. Decreasing amounts of CO2 in the argon-CO2 mixture will increase manganese and silicon in the deposit and may improve the impact properties. These electrodes are designed for single and multiple pass welding. The larger diameters (usually 5/64" (2.0 mm) and larger) are used for welding in the flat position and for horizontal fillets. The smaller diameters (usually 1/16" (1.6 mm) and smaller) are used for welding in all positions. E71T-1 is characterized by a spray transfer, low spatter loss, flat to slightly convex bead configuration, and a moderate volume of slag which completely covers the weld bead. E71T-1 electrodes have a rutile base slag.